IK FOAM Pro 2+ Foaming 1.5L Sprayer
Have questions about this product? Our detailing experts are here to help.
Description
The FOAM Pro 2+ is the upgraded version of the most recommended hand pump foam sprayer in detailing. Roughly 15 pumps builds full pressure, and the mixer system turns shampoo or APC into thick, dry, clinging foam — no pressure washer, no hose, no cord.
IK Foam Pro 2+ Sprayer 64 oz
No longer do you need a pressure washer to foam your vehicle; all you need is the IK Foam Sprayers! These sprayers were specifically manufactured for foaming and cleaning applications and can be used with a wide variety of cleaning formulas.
The IK Foam Pro 2+ sprayer provides the user a dense and durable foam suitable for cleaning and disinfecting upholstery and carpets and foaming the exterior of your vehicle. In a particularly advantageous way, the Foam Pro 2+ sprayer has a compressed air connector, an inlet valve located in the sprayer head that allows the insertion of air into the tank thanks to its universal Schrader valve for connectors worldwide.
Designed for use with chemical agents with surfactant properties (surface active). Dilute your favorite APC, car wash soap, or iron remover depending on the task at hand. Provided with the sprayer are 3 color coded adaptors for different types of foam production (dry, wet, or standard foam).
Features:
- Resistant to most acids and solvents (pH 1-11, Check Chemical Product Table).
- 3 bar safety valve with depressurization option.
- Large opening for easy filling and cleaning.
- Innovative and ergonomic design.
- Strong translucent tank with level indicator.
- Base for greater stability.
- Safety lock.
- Protective sleeve for valve chamber.
- Compressed air connector for easy pressurizing.
- Easy assembly and taking apart for cleaning and maintenance, tool free.
- Special “foam” even fan type nozzle.
- Color coded caps included to identify contents of sprayer and for nozzle storage.
- Comes with three (3) Color-Coded Mixer Adaptors! Creates your choice of dry, wet, OR standard foam.
- Orange: Very wet foam
- Green: Very dry foam
- Grey: Standard foam
Specifications:
- Maximum pressure: 3 bar – 43.5 psi
- Net weight: 1.54 lb
- Gross weight: 1.23 lb
- Useful capacity: 42 oz (1.25 L)
- Total capacity: 64 oz (1.9 L)
Can be used with products such as:
- CARPRO Reset
- CARPRO Descale
- CARPRO Hydro2 Foam
- CARPRO MultiX - Limited
- CARPRO Lift - Limited
- CARPRO Cleanse
- CARPRO Inside - Limited
- CARPRO IronX Snow Soap - Limited
- CARPRO Spotless - Limited
- Koch Chemie Gentle Snow Foam
- Koch Chemie Green Star - Limited
- Koch Chemie Pol Star - Limited
- Oberk All Purpose Soap - Limited
- Oberk Foam Wash
- OBSSSSD Auto Wash
- Ultima Paint Guard Wash
- Car Candy Bubblicious
- Car Candy Revive
- Dr. Beasley's Matte Body Wash
- BioWorx Natural Auto Soap
Not for use with products such as:
- CARPRO Retyre (Recommended foaming sprayer: IK Alkaline Foam Pro 2, IK Alkaline Foam Pro 12, CARPRO ReTyre EMPTY 500ml Bottle or SOLO CLEANLine Alkaline Foaming Sprayer)
- CARPRO Bug-Out (Recommended sprayer: IK Multi TR 1 or IK Alkaline)
- CARPRO TarX (Recommended sprayer:IK HC TR 1 Heavy Duty Sprayer 35 oz)
- CARPRO Trix (Recommended sprayer:IK HC TR 1 Heavy Duty Sprayer 35 oz)
Instructions:
- Unscrew the sprayer head by turning it anti-clockwise.
- Fill the tank with water to the indicated maximum of 1,25L – 42 oz.
- Pour the foaming product.
- Screw tightly to close.
- Pressurize the device using strokes (approx. 15). For a good quality foam it is important to pressurize until the valve clicks or pops out.
- To begin spraying, make sure the safety lock is off. Press the handle and, as you work, compensate for the loss in pressure by making more passes.
- Once the work is finished, activate the safety lock and release the pressure by pulling the safety valve.
- If more than one appliance is used with different chemicals, use the identification marker to identify the contents of each appliance by placing it on the end of the handle. To remove it, pull it in the direction shown by the arrows using a tool or pointed instrument.
Cleaning and Maintenance:
- After each use, depressurize the sprayer.
- Collect and dispose of the residual amount according to the legislation, prescriptions, and applicable regulations.
- Clean the appliance with water.
- In the event of obstruction of the nozzle, clean it with water and do not use metallic objects.
- In order to prolong the life of the joints, regularly apply some drops of oil or grease on the moving parts.
- To access the valve chamber, remove the cylinder guard by pulling it firmly.
Frequently Asked Questions
How do I get thick, dry foam from an IK foam sprayer?
Fill to the max line, use roughly a 1:10–1:20 dilution of a foaming soap or APC, and pump until the safety valve pops (about 15 strokes) — full pressure is what makes the foam dry. If foam turns wet over time, replace the foaming mixer or felt filter.
What chemicals can I use in it?
Neutral and mildly alkaline foaming products: car shampoos, snow foams, APCs, and interior foaming cleaners. For strong high-pH degreasers, use the ALK versions, and for acids use the IK HC line.
How do I maintain an IK sprayer?
Depressurize after every use, rinse the tank with clean water, and spray clean water through the nozzle. A drop of oil on the pump seals now and then keeps them supple — and genuine IK maintenance kits restore full pressure when seals eventually wear.
Shipping & Returns
Shipping
Orders ship within 1–2 business days from our Central Florida warehouse. Shipping is calculated at checkout. Delivery typically takes 3–7 business days.
Returns
Unopened items can be returned within 30 days of delivery for a full refund. Contact support to start a return.
Product Specifications
| Type | Sprayer |
| Application Method | Fill tank, pump to full pressure (~15 strokes), spray dense foam |
Pro Detailer Tips
Patch Test First
Before applying any new product to a full panel, test on a small hidden area first — especially on older paint, vinyl wraps, or exotic finishes.
Read the SDS Sheet
Every professional detailing product has a Safety Data Sheet (SDS). Review it before first use to understand proper handling, dilution limits, and safety precautions.
Store Properly
Keep products in a cool, dry location away from direct sunlight and freezing temperatures. Extreme heat or cold can degrade chemistry and shorten shelf life.
FAQ
Frequently Asked Questions
Everything you need to know before you buy.
You May Also Like
The products our customers and pro detailers keep coming back for.
Everything Your
Detail Shop Needs.
From compounds to towels, we stock every product you need to run a professional detailing operation.
